The Value Proposition The Anordain Model 1
Coming out of the SIHH/Baselworld season, there’s consistently a touch of exhaustion with regards to new watches. I’ve perused so many public statements, seen so many brand introductions, and took care of so some new (and just kind of new) watches in the course of the most recent couple of months that it can become somewhat of a haze. Everything runs together. In any case, when I took conveyance of a couple of watches from upstart brand Anordain directly between the two expos, it was a little much needed refresher. The tasteful, the thoughts, and the backstory all addressed me and I realized I needed to impart them to you all.
Anordain is situated in Glasgow, Scotland, and was established with a lovely basic mantra: “the allure of a decent mechanical watch lies in its capacity to work freely of the cutting edge world.” With that as a main priority however, Anordain’s watches don’t feel excessively nostalgic or in reverse looking. All things considered, they reference the past subtlely while as yet seeming contemporary and extraordinary. Anordain’s first watch, the appropriately named Model 1, is a statement of these standards and one that is imploringly valued at simply a hair more than $1,300.
The Model 1 is a lovely clear watch. It has three needle style hands and a hardened steel case that measures in at 38mm across, 45mm haul to-drag, and 12.3mm thick. The case has steep sides and limited hauls that curve down from just beneath the slight, cleaned bezel. That bezel gives the dial the presence of being bigger than it is (more on that in a second) and the manner in which the carries tighten makes the 18mm-wide tie show up even smaller than that. It’s a fragile difficult exercise, however I think Anordain has pulled it off pleasantly. The watch is waterproof to 50 meters, has sapphire gems front and back, and the ties are shell cordovan from Italy or calfskin from Germany, contingent upon what tone and finish you want.
Now, about those dials. This is what is the issue here and it’s the reason I think the Model 1 is an extraordinary incentive. Anordain’s dials are glassy veneer, which is a similar material that the Swiss frequently call grand feu polish. Basically, powdered glass substrate is applied to a metal base (for this situation a dainty sheet of copper)and then terminated at a temperature of many degrees Celsius until the powder melts and afterward re-solidifies into an even, glasslike surface with a huge load of profundity and character. Anordain makes theirs in Glasgow at their central command and just creates eight dials each week, since they’re totally made by hand. In spite of the fact that each watch is specially made, there are a small bunch of “stock” colors – the three watches you see here are the iron creme, mailing station red, and clear blue. There’s additionally a genuine dark that is fairly decent and truly flaunts the plating technique.
One of the things you’ll see about the polish dials is the three-dimensional impact that they make. You can see through the top layers of veneer and the printed markings appear to nearly skim over the actual dial. This is especially clear with the clear blue form here, yet very close you can see it with different shadings apparatus. The typography on the dial is all uniquely drawn for the Model 1, coincidentally, and is roused by review maps that the brand originators loved. It’s somewhat suggestive of the Bauhaus-style numerals you’d find on something like a NOMOS Tangente, however with a touch of added whimsey. I truly burrow both the sort and the dials – they improve the more you take a gander at them, which is consistently a decent sign.
Another easily overlooked detail to note is that you’ll see the dial tighten at the middle toward the post that holds the hands. This is on the grounds that you can’t poke a hole in the veneer after it’s terminated and on the off chance that you take a gander at noteworthy polish dials a large number of them will show this idiosyncrasy somewhat. Furthermore, on a portion of the more clear shadings you can get looks at where the dial feet are mounted under, however just specifically lighting. This may bug a few people, however I like that these watches feel very hand-made and show how they came to be.
Now, controlling the Model 1 is a Sellita SW200-1. This is a beautiful standard workhorse type, with a 4 Hz escapement a 38-hour power save, an Incablock stun framework, 26 gems, and programmed winding. It’s not much, and Anordain hasn’t put resources into any unique completing aside from the custom rotor, however I wouldn’t fret that here. You’re purchasing this watch for the dial and the styling, not for an insane development. I’d a lot of rather this watch stay under $1,500 and utilize a Sellita than go for something more luxurious and end up north of three thousand. However, that is simply me. Don’t hesitate to dissent – and let me know in the comments which side you come down on.
On the wrist, the Model 1 dominates. I’ll concede I wasn’t exactly secure with the drags and the case profundity when I saw the watches on a table, however once you lash them on everything bodes well. You get a genuine sense that this watch was made by a group of planners and designers (which it was) and not by certain individuals concocting an item interestingly. The watch is comfortable and looks extraordinary, with a pleasant balance. In an ideal world, I’d love something a hair slimmer – possibly nearer to 10mm – however that is not something simple to do, particularly when you’re managing a dial this way and a standard movement.
By this point, in case you’re an enthusiast of polish dialed watches, you’re likely sitting tight for me to specify one assortment of watches specifically: the Seiko Presage Enamel assortment . Contingent upon the specific model, you’re taking a gander at $1,100 to $1,400 for the three-hand-date variants of these, which means they compete soundly with the Model 1. Past the conspicuous things like the distinctions in size and style, the greatest thing that separates these two arrangement of watches is their lacquer style. The Seiko watches are more closed up, with even surfaces and an accentuation on everything looking spotless and awesome; the Anordain watches, then again, embrace their hand-made component and offer something somewhat more exploratory. Which you like better involves taste, and talking by and by I believe there’s a lot of space to appreciate both.
Ultimately, I figured out my experience with the Anordain Model 1 to be very agreeable. The most recent couple of years have demonstrated very reviving, with the expansion of miniature brands springing up to test and investigate different eccentric corners of horology. Not all are acceptable, however when they will be, they offer something somewhat unique that an enormous, worldwide company just wouldn’t create (or, sometimes, couldn’t deliver). That is actually what the Model 1 is. It’s a profound plunge into the excellence and unconventionalities of plating and the wide range of various components of the watch have been exquisitely intended to complement and emphasize that center. A little center (and a little worth) never hurts.
The Anordain Model 1 beginnings at £1,050 ($1,383.47 in the event that you need to be charged in USD) and can be bought straightforwardly from the brand. For more (and to arrange), visit Anordain online .